根據美國統計局在星期三公布的初步數據，美國在11月進口了210萬噸鋼鐵產品，比10月份進口量少了10%。11月進口成品鋼材165萬噸，比前一個月下跌的13%。估計到11月份進口的成品鋼材市場份額占到20%，而到現在為止是22%。

    與10月份相比，11月鋼卷板進口增長了15%，螺紋鋼進口增加了10%。今年迄今為止與去年同期相比進口有增長的產品包括：定尺板（增長61％）;板卷（增長37％）;線管（增長31％）;熱軋條（增長28％）;和石油國家的商品（增長22％）。

    美國最大的海外鋼鐵供應商是韓國，11月從韓國進口的鋼鐵有19.3萬噸（比10月減少了10%）， 其次是日本，11月從日本進口11.5萬噸（減少6%）；從荷蘭進口的鋼鐵增長84%達到10.8萬噸；從中國進口鋼鐵8.2萬噸（減少29%）；從印度進口鋼鐵6.6萬噸（減少49%）。

According to preliminary Census Bureau data released Wednesday, the US imported 2.1 million net tons (nt) of steel products in November, reflecting a 10 percent drop from October final data. Finished steel imports were 1.65 million nt in November, a 13 percent decline from the previous months. Year-to-date, finished steel import market share in November was an estimated 20 percent, and is 22 percent year-to-date.

Compared to October, plates in coils imports were up 15 percent in November and rebar imports rose 10 percent. Year-to-date import increases versus the same period last year include: cut length plates (up 61 percent); plates in coils (up 37 percent); line pipe (up 31 percent); hot rolled bar (up 28 percent); and oil country goods (up 22 percent).

Korea was the US' largest offshore steel supplier in November with 193,000 nt (down 10 percent from October), followed by Japan with 115,000 nt (down 6 percent); the Netherlands with 108,000 nt (up 84 percent); China with 82,000 nt (down 29 percent); and India with 66,000 nt (up 49 percent).